The French ATEME Kyrion CM5000 is an advanced modular encoder designed for satellite communication and IP network transmission.
It can be installed on single or dual-channel encoders, or a single-channel encoder and a DVB-S/S2 modulator.
The optional audio analog or digital input board can add two expansion slots.
VIDEO SPECIFICATIONS
Video Compression
MPEG-4 AVC/H.264 (4:2:0/4:2:2 8-bit, 4:2:0/4:2:2 10-bit)
MPEG-2 (4:2:0/4:2:2 8-bit)
SD: 0.5 to 30 Mbps, HD: 1 to 80 Mbps
MPEG-4 AVC – I-frame only mode up to 110Mbps
Resolutions & Frame Rates
1080i @ 25, 29.97, 30 Hz / 1080p @ 23.97, 24, 25, 50, 59.94 Hz
720p @ 50, 59.94, 60 Hz
576i @ 25 Hz / 480i @ 29.97, 30 Hz
Video Processing
CABAC, CAVLC, MBAFF, PAFF
Resize & Noise Reduction filters, Psychovisual Enhancements
Fixed GOP, Adaptive GOP, Open GOP, Closed GOP
Input format detection and auto-configuration mode
Automatic I-frame insertion and scene cut detection
Multi-pass look-ahead CBR and Capped VBR, Logo insertion
Ancillary data & Signaling & Digital Program Insertion (DPI)
AFD, WSS, WST, VPS, VPI, VITC, ATC, CC, DPI, DVB TELETEXT, Vchip, SMPTE2031, OP47,
SCTE35 insertion via SCTE104 triggers or GPIO*
AUDIO SPECIFICATIONS
Audio Compression
MPEG-1 Layer II
Dolby Digital E, DD, DD+, AC3, AC3+, PCM pass-through
MPEG-2/MPEG-4 AAC-LC, HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E decode / Dolby Digital (AC3) Encode (optional)
Dolby Digital Plus (AC3+) Encoding (optional)
OUTPUT TRANSPORT LAYER SPECIFICATIONS
MPEG-2 TS over UDP/ Unicast / Multicast streaming
MPEG-2 TS over DVB-ASI (EN 50083-9)
ASI和IP流同时传输
Conformance Standards: MPEG-2 TS / DVB / ATSC / ISDB-Tb
INPUTS / OUTPUTS INTERFACES
Video Input
SD-SDI (SMPTE 259M-C)
HD-SDI (SMPTE292M),
3G-SDI (SMPTE-424M)
Audio Input:
Embedded in SDI (up to 8 pairs per video input)
AES-EBU input supports up to 8 pairs with an optional AES board.
Analog input supports up to 4 balanced audio channels (-10 dBV to +20 dBV/600 ohms) with an optional ANL board.
Output Interfaces
1 GbE port for out-of-band management
2 GbE ports for service streaming
2 DVB-ASI outputs per Video Channel (75 Ohm BNC connector)
L-Band RF output (950-2150MHz)*
IF Band RF output (55-180 MHz)*
DVB-S (EN 300421)
Constellation QPSK, Code rate 1/2, 2/3, 3/4, 5/6, 7/8, Roll-off 0.35
DVB-S2 (EN 302307)
Constellation QPSK, 8PSK, 16APSK, 32APSK
CCM, ACM**, VCM**, Short Frames, Long Frames, Roll-off 0.20, 0.25, 0.35
Pilots ON, OFF, Symbol rate increased to 45 Mbps
DVB-S (DSNG EN 300174)*
Constellation 8PSK, FEC 8PSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
RF Outputs
Range from 950MHz to 2150MHz (Extended L-Band) or IF
(55-180 MHz)*
Step size 1 Hz, Accuracy 0.2 Hz
Output level:
Main signal +5 / -20 dBm ± 1 dB, Monitoring -20 dBm
Stability ± 0.1 dB / 10°C, Return loss > 12 dB
Attenuation range 0 to 22 dB, Attenuation step 0.1 dB
Shoulder rejection < -45 dB At f/fn = 2, Spurious < -50 dBc
Ref External 10 MHz, input/output
CONFIGURATION AND MANAGEMENT
HTML Web Graphic User Interface
Front panel with LCD menus, 17 keys for input and navigation
SNMP (MIB v2c) with remote SNMP supervisor
Presets import and export via USB slot
PHYSICAL & ENVIRONMENTAL
Dimensions 19” 1-RU (482 x 44 x 519 mm / 19” x 1.73” x 20.4”)
Min Weight 6.4 kg / 14.1 lbs. – Max Weight 7.3 kg / 17 lbs.
Power On/Off Switch on Front Panel
Extraction Handles - User Serviceable Air Filters
Cooling air flow from front to back
Redundant Power Supply 100-240 VAC, 50/60 Hz
Typical consumption 90 W Single Channel
Operating temperature: 5 to 45 °C / +41 ° to +113 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non-condensing)